Daiwa Spartan S85 8'5" PE: 6-8 + Shimano Stella SWC 14000XG

Product Description

THIS COMBO INCLUDES:
- Daiwa Spartan S100 10' PE: 4-6 $649.99
- Shimano Stella SWC 14000X $1549
A TOTAL OF $2198.99 ALL FOR $1799.99

THE ROD
- HVF Nanoplus Graphite Blank

X45: Special carbon fiber material for the improvement of the torsion-resistance. Conventional carbon fibers are always layered in a 90° angle - the new X45 material features a 45° angle and is combined with 0° and 90° layered carbon fibers. This construction makes the rods stronger and more distortion-proof. Despite the increased distortion-proofness the flexibility is maintained.
This implies that X45 rods are not only stronger and cast more precisely, but also support the angler at the presentation of delicate lures and at ending the fight with the fish safely.

X45 offers the perfect balance of strength, control and elasticity.
3DX:In contrast to conventional carbon fibers, where the fabric structure always is 2-dimensional oriented, DAIWA has developed a 3-diminsional carbon fiber material.
The interwoven 3DX carbon fibers are integrated into the blank during manufacturing. This "skeleton" enhances the compression, improves the flexural strength and makes the blank faster.
Thanks to the new 3DX carbon fiber material, the blank compression is considerably improved. The rod features always the same power transmission – regardless the direction of movement. Additionally the rod features obviously reduced torque – more precise casts are the consequence.
V-Joint: Special spigot joint - the spigot and the blank around the spigot are made of a special, exclusively for DAIWA made BIAS carbon fiber material.
The carbon fibers follow a 45-degree angle, resulting in a smaller carbon fiber demand. The consequence is a slimmer joint and a perfect bending curve
Fuji Polished Stainless Steel SIC Guides
Fuji Reel Seat with Locking Nut
High Density EVA Grips

THE REEL
The Stella SW represents the pinnacle of innovation for Shimano reel technology and fish-fighting performance. Infinity Drive has been incorporated for light and powerful winding and the upgraded Heatsink Drag (10000 to 30000 sizes) provides superior drag performance under extreme heat.
Infinity Drive has been introduced to complement the existing X-Ship system to deliver light and powerful winding. This development removes any contact the inner part of the pinion gear has with the main shaft, as a high-sliding bushing supports it. A special skid coating has been incorporated to further reduce sliding resistance. As a result, handle rotation torque is reduced by 26% when compared to the conventional system, so winding, even under extreme load, is now even easier.
A water resistant rating of IPX8 is achieved through X-Protect and X-Shield with the aluminium Hagane Body acting as a rigid and super tough outer shell. Now special X-Protect rubber gaskets have been incorporated into the line roller, making this mechanism ten times more durable than the previous model. A new and improved compact rotor design features in the 8000 sizes and has made the reel 50g lighter than the comparable Stella SW models. The HG models are designed for both casting and jigging, whereas PG is geared for jigging applications and XG for saltwater casting.

X-TOUGH DRAG | RIGID SUPPORT DRAG:
X-Tough Drag: Each drag washer is composed of metal or carbon, which have high resistance to friction. Supporting the spool from both the top and bottom means highly durable and stable drag performance.
Rigid Support Drag: Supporting the spool at two-points of the main shaft and bearing inside the spool eliminates spool wobble and delivers stable, smooth drag function.

X-SHIP:
In addition to an enlarged drive gear, optimum positioning of the pinion and drive gears, and two-point support of the pinion gear whose ends are supported by bearings, all these mechanisms deliver robust gear engagement.
The X-Ship system permits smooth winding, even under heavy loads.

SILENT DRIVE:
From the basic body design through to the most intricate parts of the drive train including the drive gear, worm shaft, worm shaft pin and worm shaft gear, every piece has been carefully reviewed.
Consequently, the smallest clearance gaps and wobbles have been eliminated to the highest tolerances. As a result, a new generation of silky smooth winding performance and pristine silence has been achieved.

X-RIGID ROTOR:
By verifying the thickness of the aluminium alloy rotor body through detailed 3D analysis, strong rigidity, high durability and excellent rotational balance is created. Thanks to its strong rigidity, the X-Rigid Rotor contributes to improved effectiveness of various parts such as the drag.

HAGANE BODY:
The Hagane Body chassis is made of highly rigid aluminium alloy. It eliminates flex, warp and distortion of the reel, and protects the engagement of gears inside. This allows for smoother winding.

HAGANE GEAR:
The Hagane Gear is produced by applying approximately 200 tons of pressure to the raw metal through unique technology called Precision Cold Forging.
Delivered with micron accuracy, no cutting work is involved. Hard and tough, the Hagane Gear has high durability and delivers smooth winding.

STELLA SWC 14000 XG:
Bearings:13+1
Max Drag: 25kg
Gear Ratio: 6.2:1
Retrieve per Crank:134cm
PE Cap:6/315yrds
Wt:675g