Browning AB3 Composite Stalker 300 Win Mag Threaded Bare

Product Description

The AB3 includes a host of features you'll also find on the X-Bolt rifle, notably the barrel. Arguably the most important factor in accuracy, the AB3 sports a high quality barrel that is made from cold-rolled steel and precision button-rifled. A premium Inflex Technology recoil pad reduces felt recoil by absorbing recoil and using directional deflection to pull the comb down and away from your face when shooting. The bolt unlock button allows the bolt to be opened with the top tang safety in the on safe position.

BARREL
The AB3 barrel is designed with the same methods as the more famous Browning rifles. Affordability is the result of innovative new technologies that simplify production without sacrificing the top performance expected of Browning. Using precision button-rifling that is triple checked for finish, straightness and uniformity, the chamber is hand-reamed.

TRIGGER
The AB3 trigger is pre-set at the factory to break between 3.5 to 4.5 pounds. The model on the Show floor was definitely closer to the lower end. The trigger had no creep at all, was very smooth, and had a crisp break. Trigger control is a primary downfall of many shooters, but the Browning AB3 trigger does a good job in providing the best possibility for success.
Large enough to use with gloves, the trigger guard is made of polymer. So is the trigger, which is a bit disconcerting at first. But then again, polymer triggers have worked well for decades on pistols.

BOLT
The AB3 bolt is oversized to provide additional rigidity, but is machined inside and out to keep the weight low. Designed with three locking lugs for extra strength, the bolt is covered in a chrome coating providing a very smooth and quiet action.

RECOIL
Browning uses an Inflex Technology recoil pad to soften recoil, particularly for the larger calibers, and allow the shooter to regain their sight picture more quickly for follow-up shots. The internal design of the recoil pad pulls the rifle down and away from the shooter’s face to assist in reducing felt recoil.

SAFETY
The AB3 uses a tang safety lever, which blocks the trigger when engaged. There is a firing pin safety for added security, and a unique bolt lock override button to the right and behind the bolt lever. When the override button is depressed it allows the shooter to safely open the bolt for inspection or unloading, while the tang safety is still engaged.

MAG
Another great feature of the Browning AB3 is the detachable magazine. In my opinion detachable magazine rifles are by far the easier rifles to load and shoot, and safer when trouble-shooting problems.

STOCK
A composite stock assists with cost reduction, however, instead of a simple composite design the AB3 has gone a step further by adding a tight grip with a slightly sharper palm angle and enhanced texture. The texture of the grip is not aggressive, but still assists the hand in grasping the rifle securely.

SPECIFICATIONS:
Action Length: Short Action (.270 WSM and .243) Long action (7mm Rem and 300 Win mag)
Barrel Length: 22” for .243 / 23" for .270WSM / 26" for 7mm Rem and 300 Win mag
Length of Pull: 13 5/8"
Drop at Comb: 11/16”
Drop at Heel: 1/2”
Weight: 6 lbs 11 oz
Magazine Capacity: 5 for .243 and 3 for magnum
Barrel Finish: Matte Blued
Stock Finish: Matte Black
Receiver Finish Matte Blued
Chamber Finish: Polished
Barrel Material: Steel
Barrel Contour: Sporter
Stock Material: Composite
Recoil Pad: Polymer
Checkering: Textured Grip Panels
Receiver Material: Steel
Trigger Finish: Matte Blued
Trigger Guard Finish: Matte
Bolt Slide Finish: Chrome
Magazine Type: Detachable
Trigger Material: Composite
Trigger Guard Material: Composite
Drilled and Tapped for Scope: Yes
Metal Finish: matte-blue oxide